|
|
Takagi T-KD20 Tankless Hot Water Heater
Direct Vent On Demand Hot Water Heaters - fueled by Natural Gas or Propane
The Takagi T-KD20 has been replaced by the
Takagi T-K3.
|
T-KD20
Tankless Water Heater
|
The Takagi T-KD20 Direct Vent Tankless Water Heater pulls air for combustion
from outside. This unit is designed for residential, commercial and
on-demand water heating and hydronic heating applications.
The TKD20 water heater is a tankless water heater that delivers up to 6.9 gallons of hot
water continuously - should be about 5.8 gpm with 55-degree water temperature rise.
The computer modulated burners use only the gas required to heat the water required -
without wasting any gas. The TKD20 has an electric ignition and uses no energy when not
producing hot water. Review the tech/specs info for more information.
The TKD20 water heater is capable of handling water flows ranging from 0.75 to 6.9 gallons
per minute, with heating capability of 19,000 to 185,000 btu, the Takagi Flash TKD20 tankless
water heater has the widest range on the market, all controlled by a computer board and
sensors checking for flow, temperature and demand. The Direct Vent Tankless
Hot Water Heater TKD20 uses stainless steel 4-inch sealed vent for the exhaust
and a 3-inch vent for the intake air.
|
|
|
Takagi Install Manuals
Tech/Specs & Install Info
T-KD20 Indirect Water Heater and Heating Applications
Venting Options
& Accessories
State Incentives!
U.S. Department of Energy's Report on Tankless Water Heaters
|
