T-M1 Tankless Water Heater
|
T-KDJr Direct Vent Heater
|
T-M1 Tankless Water Heater Heater is for commercial applications.
Up to 9.6 gallons per minute (max) and can
be installed outside in mild climates. Can vent horizontally or
vertically through a 4-inch stainless steel vent. See our Zvent Zflex
venting supplies for this. The T-M1 is also can be used for low temperature
Radiant Heat Applications.
Click here for more info and prices
on the T-M1
|
T-KJr Power Vented (Direct Vent Optioanl) Tankless Water Heater is perfect
for those tight places where you don't need 2 major uses at one time. Also, the
optional Direct Vent Kit is perfect when there is not enough make up air. The T-KJr Direct Vent
Heater can pull fresh air from outside for combustion or from inside air
and exhaust through a horizontal vent.
The T-KJr is can be used for low temperature Radiant Heat Applications
in cold climates.
Click here for more info and prices on the T-KJr
|
|
T-K3 Tankless Water Heater
|
|
At just twenty inches high, and weighing only forty pounds, the T-K3
is one of the most compact units in the Takagi line. Fully modulating gas fired
tankless on demand water heater with sealed combustion (optional) and power vented flue.
Rated for indoor/outdoor use to supply hot water to: domestic hot water systems
with or without recirculation system piping, hydronic heating systems, radiant floor heating,
and combined domestic water and heating water systems.
Click here for more info and prices on the TK3
|
|
|
T-K2 Water Heater
|
T-KD20 Direct Vent Heater
|
The TK3 has replaced the Takagi TK2 On Demand Water heater.
T-K2 Tankless Water Heater Heater is perfect for residential and
commercial applications. Up to 6.9 gallons per minute (max) and can
be installed outside in mild climates. Can vent horizontally or
vertically through a 4-inch stainless steel vent. See our Zvent Zflex
venting supplies for this. The T-K2 is also a good use for low temperature
Radiant Heat Applications.
Click here for more info and prices on the T-K2
|
The TK3 has replaced the Takagi TK2 On Demand Water heater.
T-KD20 Direct Vent Tankless Water Heater is perfect for those tight
places where there is not enough make up air. The T-KD20 Direct Vent
Heater pulls fresh air from outside for combustion and exhaust through a
horizontal vent.
The T-KD20 is also a good use for low temperature Radiant Heat Applications
in cold climates.
Click here for more info and prices on the T-KD20
|
