Tankless Water Heaters / Electric / Gas / Takagi TM32 / Gas Water Heater Specs
  Gas Tankless Water Heaters, Oil Tankless Water Heaters, Propane Tankless Water Heaters, Electric Tankless Water Heaters
  Home
Contact Us
Search - About Us
Shopping Cart
 
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Gas Tankless Water Heaters
Bosch 2400ES
Bosch 2700ES
Bosch 1600H
Bosch 1600P
Bosch 1600PS
Bosch 1000P

Takagi T-KJr
Takagi T-K3
Takagi T-K3-OS
Takagi T-M32


Rinnai R50Lsi
Rinnai R75Lsi
Rinnai R94Lsi


Electric Tankless Water Heaters
Stiebel Eltron
PowerStar
PowerStream


Electric Mini-Tank Water Heater
Ariston


Oil Tankless Water Heaters
Toyotomi OM-148
Toyotomi OM-180


RV and Boat Water Heaters
RV 500
Boat ShowerMate


Water Heater Venting
4" Z Flex Venting
3" Z Flex Venting
5" Simpson B Vent
6" Simpson B Vent


Water Heater Accessories
Bosch AQ1 Power-vent
Bosch AQ4 Power-vent
Webstones Valves
Water Connections
Whitlam Descaler Solution


PDF Manuals
What Size?
Site Map






Federal Tax Credit for Gas Tankless Water Heaters expires December 31, 2010! Hurry! Save Energy! Save Money!
Takagi T-M32 Technical Specifications

Return to Takagi T-M32 Water Heater Main Page


  • Technical Specs of the Takagi T-M32
  Please refer to install manual for full specifications
Power Input Natural Gas — 24,000-240,000 BTU
Propane Gas — 24,000-240,000 BTU
Water Pressure Minimum — 15 PSI
Maximum — 150 PSI
Gas Connection (Min) 3/4"Male NPT
Water Connection 3/4"Male NPT
Natural Gas Pressure Inlet Minimum — 5" WC
Maximum — 10.5" WC
LP Gas Pressure Minimum —8" WC
Maximum — 14.0" WC
Electrical Supply 120 Volts
Weight 56 lbs.
Dimensions
(H x W x D)
23.6 inches by 18.5 inches by 8.9 inches
Minimum Flow to Activate .5 GPM
Flow Rates
(50 degree Input Water Assumed)
90°F rise / 4.1 gallons per minute
80°F rise / 4.8 gallons per minute
70°F rise / 5.3 gallons per minute
60°F rise / 6.1 gallons per minute
55°F rise / 6.5 gallons per minute
50°F rise / 7.2 gallons per minute
40°F rise / 9.0 gallons per minute
Manifold Pressure Natural 2.5"WC
Propane 4.4"WC
Exhaust Vent Size 4" - Sealed Stainless Steel CAT III Vent Pipe
(50 feet max length subtract 5 feet each 90 degree elbow with a maximun 5 elbows)
Intake Vent Size (optional) 4" - Sealed Stainless Steel Piping
Ignition Electronic Ignition
Backflow Preventer TK-BF01 Required in weather condtions bedlow 36 F degrees
Vertical Condensation Drain Install per local code


  • Output Temperature Ratings of the Takagi T-M32
The Takagi T-M32 on demand water heater is factory preset at 120°. You can change the output temperature with the internal dipswitches to 100°, 115°, 120°, 135°, 145°, 155°, 165° or 185°. If you want to use any other temperatures than this you can purchase the optional Temperature Remote Controller (TM-RE30) that will allow the T-M32 to have output temperatures from 100° to 185°.

Please Note: Hot Water Heater Temperatures over 125°F can cause severe burns instantly or death from scalding. Children, disabled and elderly are at the highest risk of being scalded. Feel water temperature before bathing or showering.


  • For more information download PDF Manuals and Specs
Takagi Tankless Water Heater T-M32 PDF Install Manual

Takagi Tankless Water Heater T-M32 PDF Tech and Specs

Takagi Tankless Water Heater T-M32 ASME PDF Tech and Specs



Return to Takagi T-M32 Water Heater Main Page


Thanks for visiting TanklessWaterHeatersDirect.Com