Takagi TM32 Takagi Water Heater
|
The Takagi T-M32 tankless water heater was developed specifically for commercial
applications. The T-M32 offers 240,000 BTU and up to 9 GPM (Max). The versatility of being
installed either indoor, outdoor, or with a direct vent, all with the same unit.
Easy-link capability up to 4 units. You may connect up to 20 units and generate over
180 GPM using a multi-controller unit. uses HRS copper, the most durable copper in the
industry. HRS copper is stronger and harder than the standard copper, making it much
more resilient against erosion and leaks.
8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.
7-segment LED for error codes: Remote controller is not required to pinpoint problems.
The drum thickness has been increased 25% for greater heat exchanger performance and to be
more resistant to thermal stress.
Increase in fin pitch: Fins are more "spread out" which improves the durability of the
heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at
the top of heat exchanger reduces condensation.
For more information on using the Takagi TM32 Gas Hot Water Heater as a
heat source - click here!
|
