Horizontal Vent Kit AQ3 (Without the Flexible intake Pipe)
Outdoor Kit (AQOK)
Remote Thermostat Control
Life Expectancy
20+ years
Model AquaStar Bosch 2700ES - Installation Specifications
Voltage
120 VAC
Exhaust Vent Size
3-inch Stainless Steel Sealed Cat III
Combustion Air Pipe Size
3-inch PVC Galvanized or another rigid pipe
Vent Options
Horizontal or Vertical, Direct Vent Room Sealed Combustion
Exhaust Vent Termination
Horizontal or Vertical
Min / Max Vent Lengths
Minimum length: 3 feet
Maximum length: 26 ft. (8m) with one 90 degree elbow.
Less 2.5 ft. for each additional 90 degree elbow (1.25 ft for each 45 degree elbow)
Max 3 90 degree elbows
Please Note: The use of a 90 degree elbow counts as 2 1/2 feet and
a 45 degree elbow counts a 1 1/4 feet toward the minimun vent length.
Gas Connection
3/4 inch Male NPT
Water Connections
3/4 inch Male NPT
Natural Gas Pressure
Min: 4" WC
Max: 14" WC
Propane (LP) Gas Pressure
Min: 9" WC
Max: 14" WC
Water Pressure
Min: 30 PSI
Max: 150 PSI
What does Direct Vent or Room sealed mean?
The Bosch 2700ES Hot Water Heater can be installed in a small space
with the ability to take in air from the outside via a 3 inch intake vent.
The Bosch AquaStar 2700ES can be vented vertically or horizontally to the
outside. The Bosch 2700 ES Tankless Water Heater requires a dedicated 3" stainless steel
single wall vent pipe. Other vent types will void the warranty and present a health
hazard. The AquaStar 2700 ES also requires an electrical connection for the electronic
ignition.
Model Bosch AquaStar 2700ES - High Altitude Operation
Altitude 0 - 2,000 ft
No modification
Altitude 2,000 ft - 8,000 ft
(For FD Codes higher than 892)
CO2 adjustment with flue gas analyzer required
see manual supplied from unit for instructions
For operation at elevations above 2,000 ft (610 m) the Bosch 2700ES Tankless
Water Heater ratings shall be reduced at the rate of 4% for each 1000 feet (305m)
above sea level.
